Split type digital anti-corrosion pressure switch sensor NT65E series

Brand：NOIKE-AH
Model：NT65E

Specification

Product Overview

The NT65E series electronic pressure sensor uses ceramic piezoresistive chips, high polymer high-density materials resistant to strong acids and alkalis, and corrosion-resistant cables. Equipped with on-site display, LED digital display for on-site pressure or setting menu. Maximum measurement range: -1… 600 bar, digital LED displays pressure values and switch status, menu sets switch points, analog start and end points, output function, storage function, and display function, so setting does not need to be completed on site.

It has high reliability and the output can be directly used for PLC. M12 locking type connector, easy to disassemble and connect, with high protection level. Can measure positive or negative pressure. Due to its dual output of switch and analog signals, this sensor can be used as both a pressure switch and a pressure transmitter.

Technical Specifications

Range: Refer to the selection table for details
Process capability: see the table below for details
Switch output: set range 0.5% . 100% range
Accuracy: 0.5% range
Number of switches: 1 or 2 optional
Output function: PNP; NPN normally open or normally closed can be set with a rated current ≤ 300mA
Response time: ≤ 30ms
Analog output: Output type 4… 20mA analog output load ≤ 500 Ω
Accuracy: 0.5%
Repeatability: 0.5% range
Display: Red 9mm LED,
Scope: -999… 9999
Power supply: 15… 30VDC
Electrical protection: reverse polarity, overload, short circuit protection
Environmental temperature: -20… 80 ℃
Medium temperature: -30… 100 ℃
Storage temperature: -40… 100 ℃
Temperature effect: ＜ ± 0.03% FS/K
Protection level: Display header IP65, sensing probe IP67
Process connection: Stainless steel+NBR seal
Process connection cable: PTFE
Shell material: Zinc alloy
Probe material: PTFE
Electrical connection: M12 × 1-core connector